The TeLink series of units should not be placed on lines that utilize voicemail. This is because if the ring count of the unit in question is higher than that of your voicemail service, you will not be able to dial into it. If the TeLink unit has a lower…
If your 700a or 700N unit is configured to share a fax line with a fax machine, and both the fax and unit are answering on the same ring, place semicolon or comma characters (Depending on the situation, some experimentation may be requried) to delay the playback…
Check your volume setting either through the software or through the front-panel volume controls. Ensure that the volume on your output device is set correctly be it an amplifier or MOH input. Ensure that the impedance is set correctly.
This usually occurs after a connection is established normally and the upload sequence has finished. The problem is that when the data communication is suspended so that the audio can be played over the modem, some time during the transfer the connection…
When installing a modem using the NTL Studio TCA drivers, if for some reason the UAC3556B drivers do not install automatically, update them manually. Instead of pointing the explorer window to c:\Program Files\NTL Studio\TCA Drivers, instead choose the C:\…
1. Ensure telephone cables on both TCA modem and analog unit are both secure and valid. 2. Make sure Fax share (if applicable) is active and configured properly. If so, temporarily unplug fax machine from analog unit and try again. 3. Try plugging into an…
Categories 
