FORMATTING A USB DRIVE 1. Place the USB Drive into an empty USB slot on your computer and wait for Windows to recognize the drive. 2. Once the drive is recognized, double click on the “My Computer” icon. Once open the window should look like this: 3.…
1. Verify files are numbered 9.mp3 through 99.mp3. 2. Verify the DIP switch on the bottom of the unit has the "Timer" set (SW1 through SW4). If SW1 thorugh SW4 are ALL set to OFF then nothing will play.
1. Verify the USB stick is formatted FAT or FAT32. 2. Verify files on the USB stick use standard file naming convention. Files can be named using any numbers or characters except the following: / \ : * ? " < > | & (Except the Multi-Messager USB,…
1. Verify file is a .MP3 file 2. Verify that the file does not exceed 128Kbps bit-rate. 3. Verify that the file does not exceed 48KHz sample-rate. 4. Verify file is not encrypted. Encrypted Messager USB units will only play Sonocrypt (.sc3) files. 5. Verify…
1. If the status light does not start blinking, remove the memory stick and reinsert it. 2. If the status light is blinking, but never stops, make sure the file is an mp3 encoded at 128kbps mono at 44.1khz by an audio encoder, as simply renaming a .wma or…
1. Verify that the USB stick is securely plugged into the unit. If it is, look at the status light on the unit, check to see that the light is solid. If it's blinking, then the unit cannot detect the memory stick or the stick is improperly formatted. 2. Verify…
Categories 
