Check the audio quality of the original MP3 file. Ensure that file frequency and bit-rate do not exceed 44KHz and 128Kbps. The optimum MP3 file parameters are; Mono at 44 KHz (44100 Hz) Sample Rate, 128k Bit-Rate (kbps) Ensure that RCA connections on both…
To burn a Data CD for Sonorous CD using Windows 7, you must use the " Like a USB flash drive" setting in the Windows CD burning program. Attached are step-by-step instructions for creating the correct Data CD format. Note: Sonorous Model 1 will not load CDs…
Take these steps: 1. Check to make sure the CD was burned correctly. a. Take the "generic CD" that was shipped with the unit and see if that loads. If it does skip to Step 2. b. Verify the CD was burned as a DATA CD. 2. If the CD was burned correctly try…
Factory Reset: A factory will reformat and erase all audio on the Sonorous. Prior to February 2006 (Serial # beginning 0608 or prior; 06=year 2006 & 08=8th week) 1. Remove the CD from the Sonorous 2. Turn off the Sonorous (switch on back) 3. Unplug the…
Note: The attached guidelines are only for the Sonorous Model 1 pictured above. For assistance with a Sonorous v2, please visit http://nel-techlabs.host4kb.com/article/AA-00347/9/Sonorous-CD/Sonorous-v2-Instructional-Guide.html.
Note: The attached instructions are only for the Sonorous v2 pictured above. For assistance with a Sonorous Model 1, please visit http://nel-techlabs.host4kb.com/article/AA-00346/9/Sonorous-CD/Sonorous-Model-1-Instructional-Guide.html.
Categories 
